OFFSET PRODUCT SYSTEMS

Please find below a selection of our offset product cleaning systems.

Giottino -- This system has been configured for printing offices with continual needs of peculiar colors, which require just in time service or which operate with base colors.

The advantage of this machine is the fact that cans are compressed during the dispensing action and ultimately crushed flat when empty. There are no extra external pumps or devices necessary, which means very limited maintenance.

  • Maximum number of components: 14
  • Taking from 1 or 2.5 Kg cans
  • Gravimetric/container on rotary plate
  • Dispensing precision: 0.1 gr
  • Minimal dispensing: 1 gr;
  • Maximum dispensing 5,000 gr.
  • Completely automatic Inkmaker INKPRO software
  • Modem and on-line assistance

Back to top

Ring 21 + 3 -- In this system the maximum number of components and the minimum dispensing head surface are combined in an optimal solution. This machine can be equipped on option with an automatic conveyor line.

  • Maximum number of components: 21 (+ 3 on/off)
  • Taking from 25 or 200 kg drums
  • Gravimetric/fixed valves
  • Completely automatic Inkmaker INKPRO software
  • Dispensing precision: 1 gr, 0.1 gr on option
  • High pressure pumps for 25kg or 200 kg drums (type piston pump)
  • Dispensing into 5–25 kg containers, in 200 kg barrels on option
  • DN18 dispensing valves
  • Valves cleaning system “air blade cut” included
  • Modem and on-line technical assistance
  • Production time for a 25 Kg pail: 3-5 minutes

Back to top

Slider -- This machine advantage is the valves group displacement. Its movement allows always the location of 4 valves in a central dispensing point. It allows dispensing into small containers with a diameter of 120 mm.

  • Maximum number of components: 20
  • Taking from 25 or 200 kg drums
  • Gravimetric/mobile valves group
  • Completely automatic Inkmaker INKPRO software
  • Dispensing precision: 1 gr, 0.1 gr on option
  • High-pressure pumps for 25 kg or 200kg drums (type piston pump)
  • Dispensing into 1–25 kg containers, in 60 kg containers on option
  • DN18 dispensing valves
  • Valves cleaning system “air blade cut”
  • Modem and on-line technical assistance
  • Production time for a 25 Kg pail: 3-5 minutes

Back to top

IDA 25 -- Thanks to the mobile table (pendulum movement) all the valves can be located in the same dispensing point. Very small quantities can be dispensed in very small can.

The system can be equipped with an automatic conveyor line and with an automatic mixer (on option). Manual control panel included, useful in the event of a PC failure.

  • Maximum number of components: 25 (+ 4 ON/OFF)
  • Taking from 25 or 200 kg drums
  • Gravimetric/ mobile table
  • Completely automatic Inkmaker INKPRO software
  • Dispensing precision: 1 gr, 0.1 gr on option
  • Dispensing into 10–60 kg containers, in 1500 kg containers on option
  • High-pressure pumps for 25 kg or 200kg drums (type piston pump)
  • ½ ” dispensing valves
  • Valves cleaning system “air blade cut”
  • Modem and on-line technical assistance
  • Production time for a 25 Kg pail: 3-5 minutes

Back to top

O32 -- Swinging arm system, single point dispensing, which means limited and easy maintenance. Ability to dispense into almost any size can or container. The system can be equipped with an automatic conveyor line and with an automatic mixer (as option). Manual control panel included, useful in the event of a PC failure.

  • Maximum number of components: 32 (+ 1 on/off)
  • Taking from 25, 200 kg barrels or from different containers
  • Gravimetric/mobile valves
  • Completely automatic Inkmaker INKPRO software
  • Dispensing precision 1 gr
  • High-pressure pumps for 25 kg or 200kg drums (type piston pump)
  • Dispensing into 1–60 kg pails, in 300 kg pails on option
  • DN 18 dispensing valves
  • automatic washing system included
  • Modem and on-line technical assistance
  • Production time for a 25 Kg pail: 3-5 minutes

Back to top

O48 -- Swinging arm system, single point dispensing, which means limited and easy maintenance. Ability to dispense into almost any size can or container. The system can be equipped with an automatic conveyor line and with an automatic mixer (as option). Manual control panel included, useful in the event of a PC failure.

  • Maximum number of components: 48 (+ 5 on/off)
  • Taking from 25, 200 kg. barrels or from different containers
  • Gravimetric/mobile valves
  • Completely automatic Inkmaker INKPRO software
  • Dispensing precision: 1 gr
  • High-pressure pumps for 25 kg or 200kg drums (type piston pump)
  • Dispensing into 1–60 kg pails, up to 1500 kg pails on option
  • DN 20 dispensing valves
  • Automatic washing system included
  • Modem and on-line technical assistance
  • Production time for a 25kg pail: 3-5 minutes

Back to top

IDA 32 -- This system can dispense either offset products or liquid products, up to 32 x offset and 32 x liquids.

Thanks to the mobile table all the valves can be located in the same dispensing point. Ability to dispense into almost any size can or container. The system can be equipped with an automatic conveyor line and with an automatic mixer (asn option).

  • Maximum number of components: 32+ 32
  • Taking from 25 or 200 kg drums
  • Gravimetric/mobile table
  • Completely automatic Inkmaker INKPRO software
  • Dispensing precision: 1 gr, 0.1 gr on option
  • High-pressure pumps for 25 kg or 200kg drums (type piston pump)
  • Dispensing into 10–60 kg containers, in 1500 Kg containers on option
  • ¾ ” dispensing valves
  • Valves cleaning system “air blade cut”
  • Modem and on-line assistance
  • Production time for a 25 Kg pail: 3-5 minutes

Back to top